Neil Brown Neil Brown's Profile Page

Neil Brown Neil Brown

0 Course Enrolled • 0 Course Completed

Biography

300-620최신인증시험기출자료, 300-620퍼펙트덤프데모

그리고 Fast2test 300-620 시험 문제집의 전체 버전을 클라우드 저장소에서 다운로드할 수 있습니다: https://drive.google.com/open?id=1Evldwbk9RNUYUAjSv85x4bj0TWEVK6IQ

Cisco 300-620인증시험을 패스하고 자격증 취득으로 하여 여러분의 인생은 많은 인생역전이 이루어질 것입니다. 회사, 생활에서는 물론 많은 업그레이드가 있을 것입니다. 하지만300-620시험은Cisco인증의 아주 중요한 시험으로서300-620시험패스는 쉬운 것도 아닙니다.

시스코 300-620 시험은 시스코 ACI 기술을 사용하고 네트워킹 개념을 잘 이해하는 IT 전문가를 대상으로 합니다. 이 자격증은 네트워크 관리자, 네트워크 엔지니어 및 IT 전문가들이 경력을 발전시키고 ACI를 관리하고 구현하는 데 전문성을 증명하고자 할 때 이상적입니다. 산업에서 숙련된 ACI 전문가의 수요가 증가함에 따라, 시스코 300-620 자격증은 전문가들이 동료들과 경쟁에서 뛰어나며 경력 전망을 향상시키는 데 도움이 될 수 있습니다.

>> 300-620최신 인증시험 기출자료 <<

Cisco 300-620퍼펙트 덤프데모, 300-620최신 업데이트버전 공부문제

Fast2test의Cisco인증 300-620덤프는 인터넷에서 검색되는Cisco인증 300-620시험공부자료중 가장 출중한 시험준비 자료입니다. Cisco인증 300-620덤프를 공부하면 시험패스는 물론이고 IT지식을 더 많이 쌓을수 있어 일거량득입니다.자격증을 취득하여 자신있게 승진하여 연봉협상하세요.

최신 CCNP Data Center 300-620 무료샘플문제 (Q164-Q169):

질문 # 164
Refer to the exhibit.

A customer is deploying a WAN with these requirements: *Routers 1 and 2 must receive only routes 192.168.11.0/24 and 192.168.21.0724 from the Cisco ACI fabric *Reachability to the WAN users must be permitted only for the servers that are located in vrf_prod.
Which settings must be configured to meet these objectives?

A. Configure the subnets 192.168.11.0/24 and 192.168.21.0/24 as Private to VRF Configure the subnet 192.168.31.0/24 as Advertised Externally. Configure an EPG subnet 0.0.0.0/0 as External Subnets for External EPG.
B. Configure the subnets 192.168.11.0/24 and 192.168.21.0/24 as Private to VRF. Configure the subnet 192.168.31.0/24 as Advertised Externally. Configure an EPG subnet 0.0.0.0/0 as Shared Route Control Subnet.
C. Configure the subnets 192.168.11.0/24 and 192.168.21.0/24 as Advertised Externally.
Configure the subnet 192.168.31.0/24 as Private to VRF.
Configure an EPG subnet 0.0.0.0/0 as External Subnets for External EPG.
D. Configure the subnets 192.168.11.0/24 and 192.168.21.0/24 as Advertised Externally.
Configure the subnet 192.168.31.0/24 as Private to VRF.
Configure an EPG subnet 0.0.0.0/0 as Shared Route Control Subnet.

정답：C

설명：
The scenario involves deploying a WAN with Cisco ACI, where Routers 1 and 2 (connected via an L3Out with OSPF Area 0) must receive specific routes (192.168.11.0/24 and 192.168.21.0/24) from the ACI fabric, and reachability to WAN users must be permitted only for servers in vrf_prod. The diagram shows three bridge domains (bd_vlan11, bd_vlan21, bd_vlan31) with their respective subnets and EPGs, all under vrf_prod, along with an L3Out (epg_l3out) for WAN connectivity.
Requirement Analysis
Routers 1 and 2 must receive only routes 192.168.11.0/24 and 192.168.21.0/24:
These subnets belong to bd_vlan11 and bd_vlan21, respectively. To advertise these routes to Routers 1 and 2 via the L3Out, they must be marked with the appropriate scope in the bridge domain configuration.
In ACI, the "Advertised Externally" scope on a subnet ensures that it is advertised to external routers via the L3Out routing protocol (OSPF in this case).
Reachability to WAN users must be permitted only for servers in vrf_prod:
This implies that only the subnets in vrf_prod (192.168.11.0/24, 192.168.21.0/24, and 192.168.31.0/24) should be accessible, but WAN users should only reach specific subnets based on policy.
The external EPG (epg_l3out) represents the WAN users (10.171.0.0/16), and its subnet scope must control inbound reachability.
The subnet 192.168.31.0/24 (bd_vlan31) should not be advertised to the WAN, as it is not listed in the routes Routers 1 and 2 should receive.
Option Evaluation
A . Configure the subnets 192.168.11.0/24 and 192.168.21.0/24 as Private to VRF. Configure the subnet 192.168.31.0/24 as Advertised Externally. Configure an EPG subnet 0.0.0.0/0 as External Subnets for External EPG:
Setting 192.168.11.0/24 and 192.168.21.0/24 as "Private to VRF" means they are not advertised externally, which fails the requirement for Routers 1 and 2 to receive these routes.
Setting 192.168.31.0/24 as "Advertised Externally" incorrectly advertises this subnet to the WAN, which is not desired.
The "External Subnets for External EPG" scope on 0.0.0.0/0 allows WAN users to reach all subnets in vrf_prod, which is correct for reachability.
Conclusion: Fails the first requirement (route advertisement).
Reference:
B . Configure the subnets 192.168.11.0/24 and 192.168.21.0/24 as Private to VRF. Configure the subnet 192.168.31.0/24 as Advertised Externally. Configure an EPG subnet 0.0.0.0/0 as Shared Route Control Subnet:
Similar to Option A, setting 192.168.11.0/24 and 192.168.21.0/24 as "Private to VRF" prevents their advertisement to the WAN, failing the first requirement.
Setting 192.168.31.0/24 as "Advertised Externally" incorrectly advertises this subnet.
The "Shared Route Control Subnet" scope allows route leaking between VRFs, which is irrelevant here since there is only one VRF (vrf_prod) and no route leaking is required.
Conclusion: Fails both requirements (route advertisement and reachability control).
C . Configure the subnets 192.168.11.0/24 and 192.168.21.0/24 as Advertised Externally. Configure the subnet 192.168.31.0/24 as Private to VRF. Configure an EPG subnet 0.0.0.0/0 as Shared Route Control Subnet:
Setting 192.168.11.0/24 and 192.168.21.0/24 as "Advertised Externally" ensures these subnets are advertised to Routers 1 and 2 via OSPF, meeting the first requirement.
Setting 192.168.31.0/24 as "Private to VRF" prevents its advertisement to the WAN, which aligns with the requirement since only 192.168.11.0/24 and 192.168.21.0/24 should be advertised.
The "Shared Route Control Subnet" scope on 0.0.0.0/0 in the external EPG is incorrect for controlling reachability. This scope is used for route leaking, not for defining which subnets are accessible from the external EPG.
Conclusion: Meets the first requirement but fails the second (reachability control).
D . Configure the subnets 192.168.11.0/24 and 192.168.21.0/24 as Advertised Externally. Configure the subnet 192.168.31.0/24 as Private to VRF. Configure an EPG subnet 0.0.0.0/0 as External Subnets for External EPG:
Setting 192.168.11.0/24 and 192.168.21.0/24 as "Advertised Externally" ensures these subnets are advertised to Routers 1 and 2 via OSPF, meeting the first requirement.
Setting 192.168.31.0/24 as "Private to VRF" prevents its advertisement to the WAN, which is correct since only the specified subnets should be advertised.
The "External Subnets for External EPG" scope on 0.0.0.0/0 in the external EPG (epg_l3out) allows WAN users (10.171.0.0/16) to reach all subnets in vrf_prod, which includes 192.168.11.0/24, 192.168.21.0/24, and 192.168.31.0/24. This satisfies the second requirement, as servers in vrf_prod are accessible, and contracts can further restrict access if needed (though not specified in the question).
Conclusion: Meets both requirements (route advertisement and reachability).
Final Answer Justification
D is correct because:
It ensures that only 192.168.11.0/24 and 192.168.21.0/24 are advertised to Routers 1 and 2 by setting their scope to "Advertised Externally." It keeps 192.168.31.0/24 private to vrf_prod by setting its scope to "Private to VRF." It allows WAN users to reach all vrf_prod subnets (including servers) by setting 0.0.0.0/0 as "External Subnets for External EPG," fulfilling the reachability requirement.
Primary Cisco Reference:
Cisco APIC Layer 3 Configuration Guide, "Configuring Subnets for L3Out." Cisco ACI Routing and Forwarding Guide, "External EPG and Subnet Scopes." Cisco ACI Best Practices, "Controlling Route Advertisement and Reachability."

질문 # 165
An engineer must limit management access to the Cisco ACI fabric that originates from a single subnet where the NOC operates. Access should be limited to SSH and HTTPS only. Where should the policy be configured on the Cisco APIC to meet the requirements?

A. ACL on the management interface of the APIC
B. policy on the management VLAN
C. policy in the management tenant
D. ACL on the console interface

정답：C

설명：
Section: ACI Management
Explanation/Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/cli/nx/cfg/ b_APIC_NXOS_CLI_User_Guide/b_APIC_NXOS_CLI_User_Guide_chapter_01000.html

질문 # 166
In the context of ACI Multi-Site, when is the information of an endpoint (MAC/IP) that belongs to site 1 advertised to site 2 using the EVPN control plane?

A. Endpoint information is not exchanged across sites unless COOP protocol is used.
B. Endpoint information is exchanged across sites when the endpoints are discovered in both sites.
C. Endpoint information is not exchanged across sites unless a policy is configured to allow communication across sites.
D. Endpoint information is exchanged across sites as soon as the endpoint is discovered in one site.

정답：A

설명：
Section: ACI Anywhere
Explanation/Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric- infrastructure/white-paper-c11-739609.html#CiscoACIMultiSiteoverlaydataplane

질문 # 167
Refer to the exhibit.

Which two components should be configured as route reflectors in the ACI fabric? (Choose two.)

A. Leaf1
B. apic2
C. Spine2
D. apic1
E. Spine1
F. Leaf2

정답：C,E

질문 # 168
Regarding the MTU value of MP-BGP EVPN control plane packets in Cisco ACI, which statement about communication between spine nodes in different sites is true?

A. By default, spine nodes generate 9000-bytes packets to exchange endpoints routing information. As a result, the Inter-Site network should be able to carry 9000-bytes packets.
B. By default, spine nodes generate 9000-bytes packets to exchange endpoints routing information. As a result, the Inter-Site network should be able to carry 9100-bytes packets.
C. By default, spine nodes generate 1500-bytes packets to exchange endpoints routing information. As a result, the Inter-Site network should be able to carry 1800-bytes packets.
D. By default, spine nodes generate 1500-bytes packets to exchange endpoints routing information. As a result, the Inter-Site network should be able to carry 1500-bytes packets.

정답：B

질문 # 169
......

여러분은 먼저 우리 Fast2test사이트에서 제공되는Cisco인증300-620시험덤프의 일부분인 데모를 다운받으셔서 체험해보세요. Fast2test는 여러분이 한번에Cisco인증300-620시험을 패스하도록 하겠습니다. 만약Cisco인증300-620시험에서 떨어지셨다고 하면 우리는 덤프비용전액 환불입니다.

300-620퍼펙트 덤프데모: https://kr.fast2test.com/300-620-premium-file.html

만일 300-620시험문제가 변경된다면 될수록 7일간의 근무일 안에 300-620제품을 업데이트 하여 고객들이 테스트에 성공적으로 합격 할 수 있도록 업데이트 된 Implementing Cisco Application Centric Infrastructure덤프 최신버전을 구매후 서비스로 제공해드립니다, 그 답은Fast2test 300-620퍼펙트 덤프데모에서 찾을볼수 있습니다, Fast2test의Cisco인증 300-620덤프의 도움으로 Cisco인증 300-620시험을 패스하여 자격증을 취득하면 승진이나 연봉인상의 꿈이 이루어집니다, 300-620인증시험은 IT업계에 종사하시는 분들께 널리 알려진 유명한 자격증을 취득할수 있는 시험입니다, 저희 Cisco 300-620덤프에 있는 문제와 답만 기억하시면 300-620시험을 패스할수 있다고 굳게 믿고 있습니다.

그 마법이 닿기 직전, 남자의 입에서 전과 다른 음산한 목소리가 흘러나왔다, 이그니스 좋아, 만일 300-620시험문제가 변경된다면 될수록 7일간의 근무일 안에 300-620제품을 업데이트 하여 고객들이 테스트에 성공적으로 합격 할 수 있도록 업데이트 된 Implementing Cisco Application Centric Infrastructure덤프 최신버전을 구매후 서비스로 제공해드립니다.

최신 업데이트된 300-620최신 인증시험 기출자료 시험공부자료

그 답은Fast2test에서 찾을볼수 있습니다, Fast2test의Cisco인증 300-620덤프의 도움으로 Cisco인증 300-620시험을 패스하여 자격증을 취득하면 승진이나 연봉인상의 꿈이 이루어집니다, 300-620인증시험은 IT업계에 종사하시는 분들께 널리 알려진 유명한 자격증을 취득할수 있는 시험입니다.

저희 Cisco 300-620덤프에 있는 문제와 답만 기억하시면 300-620시험을 패스할수 있다고 굳게 믿고 있습니다.

Fast2test 300-620 최신 PDF 버전 시험 문제집을 무료로 Google Drive에서 다운로드하세요: https://drive.google.com/open?id=1Evldwbk9RNUYUAjSv85x4bj0TWEVK6IQ